Kyocera ECOSYS M4125idn - Page 362

8-44
System Menu > [System/Network]
Item Description
ThinPrint ―
Protocol Settings Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [On].
Value: Off, On
NOTE
This function can only be used when the optional UG-33 is activated.
Direct SMTP Port
Number
Specifies the port number used. The default port number is 4000.
Value: 1 to 32767
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Thin Print over SSL To use the Thin Print over SSL protocol, set [Thin Print Over SSL] and [SSL] to [On].
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Available Network
(Wi-Fi Direct)
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Available Network
(Wi-Fi)
Available Network
(Wired Network)