Kyocera FS-1028MFP

Management
OPERATION GUIDE 11-3
11
Use the procedure below to enable user login administration.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main
unit operation panel.
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
2 In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account].
3 Press the OK key. The User/Job Account menu
appears.
4 Press the U or V key to select [User Login Set.].
5 Press the OK key. The User Login Set. menu
appears.
6 Press the U or V key to select [User Login].
Login User Name L b
*******************
Login Password:
[ Login ]
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.: a b
*********************
2 Local User List
3 Group Auth.
[ Exit ]
1 User Login