Management
11-4 OPERATION GUIDE
7 Press the OK key. User Login appears.
8 Press the U or V key to select [Local Authentic.]
or [Netwk Authentic.], and then press the OK key.
Select [Off] to disable user login administration.
If you select [Netwk Authentic.], enter the host
name and domain name of the authentication
server (up to 64 and 256 characters, respectively),
and then press the OK key. Then, select the server
type from [NTLM] or [Kerberos] and then press the
OK key.
NOTE: If the login user name and password are
rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the
Authentication Server
If you cannot login because of the setting of the
machine, login with any administrator registered in the
local user list and correct the settings. If the server type
is [Kerberos], only domain names entered in uppercase
will be recognized.
Completed. is displayed and the screen returns to
the User Login Set. menu.
To Next Page
Loading...
