Why is my Kyocera Printer emitting steam?
The steam emitted from your Kyocera printer is likely due to the evaporation of moisture from the paper during printing, especially in low room temperatures or when using damp paper. This is generally not a problem, and you can continue printing. If the steam is a concern, try raising the room temperature or using newer, dryer paper.
How to fix 'Close left cover' message on Kyocera Printer?
The message 'Close left cover' on your Kyocera printer simply means that the left cover of the printer is open. Ensure that you close the left cover.
What does 'Account error' mean on Kyocera Printer?
The 'Account error' message on your Kyocera printer appears when the Job Accounting function is enabled and an attempt to specify job accounting settings or to register or delete an account fails. Press [OK] to return the printer to a print-ready status.
How to resolve 'Load paper in cassette #. A4 Different paper size is set' error on Kyocera Printer?
The error message 'Load paper in cassette #. A4 Different paper size is set' on your Kyocera printer indicates that the paper size in the cassette does not match the paper size set on the paper size dial. Verify that the paper size setting is correct.
Why does my Kyocera Printer produce a gray background?
To address a gray background issue on your Kyocera printer, refresh the drum to restore printing quality. If this doesn't solve the issue, consider adjusting the print density. If the problem persists, it is recommended to call for service.
How to remove dirt from paper edges on Kyocera Printer?
To remove dirt from the top edge or back of the paper on your Kyocera printer outputs, try printing several pages to see if the issue resolves itself. If the problem continues, clean the registration roller. If the problem persists after cleaning, call for service.
General| Category | All in One Printer |
|---|---|
| Technology | Laser |
| Maximum Resolution | 1200 x 1200 DPI |
| Duplex Printing | Yes |
| Print Margins | 4 mm |
| Standard Printer Languages | PCL6 |
| Maximum Print Size | A4 |
| Interface | USB 2.0, Ethernet |
| Warm-up Time | 15 s |
Details how to load paper into the printer's cassettes and multi-purpose tray.
Configures network settings, including IP address and protocol details.
Guides on replacing the toner container and necessary steps.
Lists and explains various error messages and their corrective actions.
Provides step-by-step guidance for clearing paper jams.
To Next Page