COMMAND CENTER Pages
• AppleTalk Name
Printer > System
The table below provides a summary of the items displayed on the System
page.
Form Feed Timeout
Adjusts the timeout between 5 and 495 seconds, after which a form feed will
occur in the absence of data. The default setting is 30 seconds.
Emulation
Selects an emulation mode.
Alternate Emulation
Specifies which emulation mode should be used for processing at the time
data other than KPDL is received, when AUTO is selected for emulation.
JPEG/TIFF Print
This determines the physical size of JPEG images when printing them from a
USB flash device. Choices include Fit to Paper Size, Image Resolution,
and Fit to Print Resolution.
XPS Fit to Page
This determines the page size for printing XPS data. Turn On to fit print data
over the page size; and turn Off to print in the original size.
Paper Feed Mode
Determines the behavior of paper feed selection when the paper you
requested of size and/or type is not available in the current paper source.
Auto lets the machine to search for the matching paper including all the
paper sources. Fixed does not perform searching in the other paper
sources.
Duplex Mode
Selects the default duplex mode from Off, Long Edge and Short Edge.
Available on machines with the duplex printing.
Copies
Sets the number of copies to print.
Page Orientation
Switches Portrait or Landscape page orientation.
Tone
Sets Tone mode to Normal or Fine. The default setting is Normal. Available
for some color machines.
Gloss Mode
Sets Gloss Mode to High or Low. The default setting is Low. Available for
some color machines which support Gloss Mode.
Color Mode
Sets Color Mode to Black & White (Monochrome) or Full Color. Available
for some color machines.
KIR Mode
Switches KIR smoothing On or Off. Available for some machines.
EcoPrint Mode
User Guide
3-15
To Next Page
Loading...
Need help?
General