COMMAND CENTER Pages
Note: If the server type is [Kerberos (Win2000/2003)], only domain names
entered in uppercase will be recognized.
When a user sets authentication and accesses COMMAND CENTER, only the
Start page is displayed. The Login button is displayed in the upper left of the
screen. Click it to log in. When the user logs in with an Administrator account,
hidden pages are displayed and can be accessed. When the user logs in with a
General User account, the user can access the user's account page on Basic >
Security > User Login and the user’s settings on the basic page, and the user's
document box and shared document box pages.
Advanced > Management > Authentication > Network User
Property
This allows to obtain user information at authenticating the user over the
network.
Obtain Network User Property
Turned On to obtain user information.
LDAP Server Name
Specifies a name or IP address for the LDAP server.
LDAP Port Number
Specifies a port number for LDAP or use the LDAP default port 389.
Search Timeout
Specifies a period of time for searching the LDAP server.
LDAP Encryption
Selects the type of encryption according to the type of security employed by
the LDAP server. Select Off when encryption is not used.
Name 1 (2)
Specifies the LDAP attribute to obtain a user name for display, from the
LDAP server.
E-mail Address
Specifies the LDAP attribute to obtain an e-mail address from the LDAP
server.
Advanced > Management > Authentication > Group Authorization
Set.
After the network authentication has been established by executing Advanced >
Management > Authentication > General on page 3-47 , you can add a group to
specify the Group Information and items for Job Authorization Settings.
Up to 20 group accounts are registerable. By default, a group account (Other)
has been preset. This is used to process any group account which does not fall
within the registered groups.
Group Authorization
Turned On if you want to individually authorize or deauthorize the groups.
Number of Registered Groups
The number of the groups currently registered.
Adding a New Group
1
Click Group Authorization Set., open the Group Authorization Set. page.
COMMAND CENTER
3-48
To Next Page
Loading...
Need help?
General