COMMAND CENTER Pages
Sender Address
Displays the sender address used for E-mails sent from this machine. For
how to change the sender address, set the Email address in E-mail
Address on FAX / i-FAX > i-FAX > POP3 on page 3-30.
Signature
Displays the signature to be inserted in the end of the E-mail body. For how
to change the signature, refer to Advanced > E-mail > SMTP > General on
page 3-41.
FAX / i-FAX > i-FAX > POP3
The section below provides a summary of the items displayed on the POP3
page.
Check Interval
Displays the interval, in minutes, for connecting to the POP3 server to check
for incoming mails. For how to change this setting, refer to Advanced >
E-mail > POP3 > General on page 3-43.
Run once now
Click the Receive button to immediately receive E-mail from the POP3
server.
E-mail Address
Enter the E-mail address for i-FAX. The E-mail address is displayed in
Sender Address on FAX / i-FAX > i-FAX > SMTP on page 3-29.
POP3 Server Name
Enter the POP3 server name or IP address.
POP3 Port Number
Enter the POP3 port number or use the default port number 110.
POP3 Server Timeout
Enter the timeout in seconds during which this machine tries to connect to
the POP3 server.
Login User Name
Enter the login name of the user.
Login Password
Enter the password for connecting to the user name above.
Use APOP
Enables or disables APOP.
Test
Tests to confirm that the settings on this page are correct. When the Test
button is pressed, this machine tries to connect to the POP3 server.
E-mail Size Limit
Enter maximum E-mail size in Kilobytes. When the value is 0, the limitation
for E-mail size is disabled.
Cover Page
Specifies whether to print the body of E-mail in addition to the attached files.
When this item is set to On, the attached files and the body of E-mail are
printed.
COMMAND CENTER
3-30
To Next Page
Loading...
Need help?
General