COMMAND CENTER Pages
Enables or disables this user number.
E-mail Address
Enter the E-mail address.
POP3 Server Name
Enter the POP3 server name or IP address. If you use the server name, you
must first specify the DNS server information. For details, refer to Advanced
> Protocols > TCP/IP > General on page 3-35.
POP3 Port Number
Enter the POP3 port number or use the default port number 110.
POP3 Server Timeout
Enter the timeout in seconds during which this machine tries to connect to
the POP3 server.
Login User Name
Enter the login name of the user.
Login Password
Enter the password for connecting to the user name above.
Use APOP
Enables or disables APOP. To use APOP, make sure that the POP3 server
supports APOP.
Test
This will test one transmission for each press, attempting to establish
communication with the POP3 server.
Delete e-mail after retrieval
Enables or disables the Delete E-mail after retrieval function. When this item
is set to On, the retrieved E-mail is deleted from the POP3 server. When this
item is set to Off, the E-mail will not be deleted after retrieved from the POP3
server.
E-mail size limit
Enter maximum E-mail size in Kilobytes. When the value is 0, the limitation
for E-mail size is disabled.
Cover Page
Specifies whether to print the body of E-mail in addition to the attached files.
When this item is set to On, the attached files and the body of E-mail are
printed. When no attached files exist, only the body of E-mail is printed.
When this item is set to Off, only the attached files are printed. When no
attached files exist, nothing is printed.
Advanced > Management > SNMP > SNMPv1/v2c
The SNMP protocol is used for providing and transferring management
information within the network environment. Should an error occur such as Add
Paper, the printing system automatically generates a trap, an error message
sent to predetermined trap recipients.
The community names are used like passwords.
SNMPv1/v2c
Sets whether to use the SNMPv1/v2c protocol. Set On to use it. After you
have changed the setting, you must restart the printing system.
Read Community
COMMAND CENTER
3-44
To Next Page
Loading...
Need help?
General