COMMAND CENTER Pages
Switches EcoPrint On or Off to control toner consumption for saving the
printing costs. The default setting is Off. Available for some machines.
Toner Save Level
Selects Toner Save Level from 1(Low) [low saving, darker printing] to
5(High) [high saving, lighter printing] when EcoPrint Mode is On.
Resolution
Changes the printing resolution. Available for some machines.
Printer > System > APL.Filter
This page allows you to configure the APL.Filter. The APL.Filter is a function
that converts the received print data to the specified code and prints that data.
Filter
Switches the APL.Filter On or Off.
Filter Name
Selects the APL.Filter. You can select the ASCII to KPDL conversion
process.
Printer > System > APL.Filter Parameters
Configure items that can be set differently between APL.Filters. You can specify
fonts and the text to be converted.
Font
Specifies the fonts used for printing.
Start of String
Specifies the character string with which the text to be converted begins. Up
to 15 single-byte characters can be specified.
End of String
Specifies the character string with which the text to be converted ends. The
default setting is \f. Up to 15 single-byte characters can be specified.
Printer > Media Input
This page lets you configure paper trays by type and size. You can also
configure cassette groups.
Default
Determines the default tray to feed paper from.
Tray
Displays the trays including those provided by option.
Size
Displays the paper size for each input tray. This setting can be changed
using the dropdown list.
Type
Displays the paper type for each input tray. This setting can be changed
using the dropdown list.
Group Settings
If multiple cassettes are available, you can set up to three groups of
cassettes. Cassettes in a group are treated as a single tray. Paper can be
fed continuously from the grouped cassettes.
COMMAND CENTER
3-16
To Next Page
Loading...
Need help?
General