COMMAND CENTER Pages
LDAP Encryption
Selects the type of encryption according to the type of security employed by
the LDAP server. Select Off when encryption is not used.
• LDAPv3/TLS
Uses explicit mode for data communication. Select this if the server supports
the startTLS command. This uses the same port (389) as LDAP.
• LDAP over SSL
Uses implicit mode for data communication. The server provides services
using the LDAP over SSL port (636). Encryption is applied to any data
communication using this port.
Advanced > Management > Authentication > General
Setting Authentication allows only the predefined users to access pages. In
addition, you can discriminate users by giving either the General User or
Administrator privilege to each user. Before using the authentication function,
you have to define those users. For how to define users, refer to Basic >
Security > User Login on page 3-12.
Authenticate mode
Specifies whether to enable or disable the authentication function. To disable it,
select Off. To enable it, select either of the following.
• Local Authentication
Users are registered in this machine and one-to-one authentication is
performed between this machine and a PC.
• Network Authentication
This machine and relevant PCs need to be under the management of the
Windows domain network. Depending on model, users registered in this
machine must be the same as those registered in the domain controller.
Domain Name
Specifies the domain name of the Windows domain network when Network
Authentication is specified in the preceding item.
Host Name
Specifies the domain controller name of the Windows domain network when
Network Authentication is specified in the preceding item.
Port Number
Use the numeric keypad to type the port number when Server Type is
external.
Server Type
Specifies the authentication method used by the domain controller when
Network Authentication is specified in the preceding item. Select NTLM
when the domain controller is Windows NT or Kerberos for Windows 2000
Server or Windows Server 2003. Select Ext. to set up network authorization
using an external server such as KMnet Account Agency. (The port number
above should be 9093 for KMnet Account Agency.)
Keyboard Login
This determines whether login authentication is allowed via the machine
operation panel or not, despite the IC card authentication is activated (using
the IC card authentication kit installed).
User Guide
3-47
To Next Page
Loading...
Need help?
General