2 Access
Accessing COMMAND CENTER
1
Run the web browser.
2
In Address or Location, enter the machine IP address as the URL, e.g.
http://192.168.10.150.
Select a category from the navigation bar on the left to view and set values for
that category.
Admin password
Setting Administrator Password restricts general users' access to pages other
than the Start page. For security purposes, setting the Administrator password
is highly recommended. With some models, the default Administrator password
is factory-set as admin00. For how to define the administrator password, refer to
Basic > Security > Account Settings on page 3-10.
The Login button is displayed at the upper left of the screen. To access a page
other than the Start page, click Login. (This button may not be displayed on
some models. When this button is not displayed, click a page other than the
Start page.) The password input window is displayed. Entering the predefined
administrator password allows the user to access all pages.
Note: When local authentication is enabled, allowing only the predefined
users to access page, the user name and password must be entered after
clicking Login. For details on defining the users, refer to Basic > Security > User
Login on page 3-12.
Authentication
Setting Authentication allows only the predefined users to access pages. In
addition, you can discriminate users by giving either the General User or
Administrator privilege to each user. Before using the authentication function,
you have to define those users. For how to define users, refer to Basic >
Security > User Login on page 3-12.
When a user sets authentication and accesses COMMAND CENTER, only the
Start page is displayed. The Login button is displayed in the upper left of the
screen. Click it to log in. When the user logs in with an Administrator account,
hidden pages are displayed and can be accessed. When the user logs in with a
General User account, the user can access the user's account page on Basic >
Security > User Login and the user’s settings on the basic page and the user's
document box and shared document box pages.
The authentication function come in two types: Local Authentication and
Network Authentication. For more information, refer to Advanced >
Management > Authentication > General on page 3-47 .
User Guide
2-1
To Next Page
Loading...
Need help?
General