COMMAND CENTER Pages
Selects the file quality mode (1 [Low] to 5 [High]) in which the scanned data
will be saved.
High-Compression PDF Image
Selects the compression rate for PDF files from 1 (Low), 2 (Medium), and 3
(High).
High-Compression PDF Auto Color
Sets whether to enable or disable the automatic color/ monochrome
detection for the original to be scanned.
Auto Color Correction
Selects the detection level from five levels applied when High-Compression
PDF Automatic Color Detection is set to On. The color mode tends to be
used at Level 1 and the monochrome mode at Level 5.
Zoom
Switches the zoom ratio between Auto and 100%. The default setting is
100%.
Original Orientation
Switches between Top Edge Top and Top Edge Left.
Scanner > FTP
The table below provides a summary of the items displayed on the FTP page.
FTP
Switches FTP On or Off.
FTP Port Number
Sets the FTP Port Number or use the FTP default port 21.
FTP Encrypted TX
This enables or disables Encryption for communication. When turned On,
the encryption algorithm that is selected by Advanced > Security > Secure
Protocols on page 3-51 is used.
Scanner > SMB
The table below provides a summary of the items displayed on the SMB page.
SMB Protocol
Switches the SMB Protocol On or Off.
SMB Port Number
Sets the SMB default Port Number or use the SMB default port 139 (For
Windows Vista/7, use 445).
Scanner > E-mail
The table below provides a summary of the items displayed on the E-mail page.
Subject
You can include the model name of the printer, serial number, MAC address,
host name and IP address in the subject line as follows: Enter one of the
following conversion strings starting with %. The string will be converted into
a pre-defined string to display the above information.
• %printer = Model
COMMAND CENTER
3-18
To Next Page
Loading...
