Kyocera FS-C5350DN

2K8
1-3-6
Service items Description
No. Items Description
 Billing counting timing -
 Temperature (machine
inside)
-
 Temperature (machine out-
side)
-
 Relative temperature
(machine outside)
-
 Absolute temperature
(machine outside)
-
 LSU information -
 LSU2 information -
 Fixed asset number -
 Media type attributes
1 to 28 (Not used: 18, 19,
20)
Weight settings
0: Light
1: Normal 1
2: Normal 2
3: Normal 3
4: Heavy 1
5: Heavy 2
6: Heavy 3
7: Extra Heavy
Fuser settings
0: High
1: Middle
2: Low
3: Vellum
Duplex settings
0: Disable
1: Enable
 SPD information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 Calibration information -
 RFID information -
 RFID reader/writer version
information
-
 Engine parameter informa-
tion
hexadecimal, 512 bytes
 Optional paper feeder soft-
ware version
[Paper feeder 1][Paper feeder 2][Paper feeder 3][Paper feeder 4]