Administration
2
Select KMnetAdmin Service, then click Stop the service.
When KMnetAdmin Service is stopped, KMnet Admin Report Service will stop
also.
3
On the Start menu select Run. Type cmd.
4
At the command prompt, type cd C:\KMnetAdmin\bin.
Note: Path may differ if you did not install KMnet Admin to the default
location.
5
Type restore C:\KMnetAdmin\backup\backup-filename.zip.
6
In Control Panel, open Administrative Tools, then open Services.
7
Select KMnetAdmin Service, then click Start the service.
8
Select KMnetAdmin Report Service, then click Start the service.
Web Server
You can choose the server protocol setting. The selection is applied the next
time the application is started.
HTTP
Faster. A client/server Internet protocol used by Web browsers to transfer
hypertext requests, which control the formatting and transmission of
messages over the Web.
HTTPs
More secure, is encrypted, and uses a different port. A variant of HTTP used
to access secure Web servers.
Consoles
Consoles lets you disable or enable selected consoles. When a console is
disabled, you cannot use it to retrieve information from network printing devices.
All information received previously is saved in the database. Once disabled, you
can enable the console again from the Administration console. The
Administration and Device Manager consoles cannot be disabled.
To disable or enable consoles, select the Administration console and click
Consoles in the navigation area. The Disable Console and About buttons
appear at the top of the right pane. The Disable Console button is unavailable
until you select a console that can be disabled.
Choosing a Console
You can choose a console when logging on to KMnet Admin, and you can
change to a different console at any time.
If you select Choose a console to open when logging on, you must then select
a console from the list. The console you chose is displayed. You must select a
console from the list each time you log on this way.
User Guide
2-10
To Next Page
Loading...
Need help?
General
