Device Manager
Displays the level of each toner color by graphic image and percentage.
Monochrome models display black toner only.
Media Input
Displays the media available in the MP Tray, standard paper feeders, and
optional paper feeders:
Size/Type
The page size and media type setting for each paper source.
Level
The amount of paper currently loaded in each paper source.
Maximum
The total capacity of each paper source.
Stapler status
Displays the current stapler status for models that support stapling. The
options are:
Yes
Stapler contains staples.
Error
Stapler is empty.
No
Stapler is not installed.
Device Settings
Displays all available printing device properties. Properties that cannot be
changed are unavailable. Not all properties are displayed for all devices. Click
the buttons on the right to open or close each group of settings.
Editable Identification
A user with privileges can change selected settings. Click Apply to apply the
change to the printing device.
Display Name
Type a name for the printing device, usually the model name.
Host Name
Type the name of the computer the device is attached to. This option is not
available when the device is not connected.
sysLocation
Type the device's office location. This option is not available when the device
is not connected.
Asset Number
Type a number to use for inventory control. This option is not available when
the device is not connected.
Equipment ID
Type a number to use for accounting purposes. This option is not available
when the device is not connected.
Description
Type desired information about the printing device.
Fixed Identification
User Guide
3-26
To Next Page
Loading...
Need help?
General
