2WA/2NJ/2RK
6-158
Contents
Sets the coefficient of custom size with A4/Letter size. The coefficient set here is used to convert
the black ratio in relation to the A4/Letter size and to display the result in the service status page.
Purpose
Set the coefficient for converting the black ratio for custom sizes in relation to the A4/Letter size
Setting
1.Press the [Start] key.
2.Select the item to set.
3.Change the setting value by using [+] [-] key or the numeric keypad.
4.Press the [Start] key and then fix the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U332 Adjusting the black coverage coefficient
(Message: Adjust Coverage Size Calculation Rate)
Items Contents Setting range Initial set-
ting
Rate Set the coefficient for converting the black ratio
for custom sizes in relation to the A4/Letter size.
0.1 to 3.0 1.0
To Next Page
Loading...
