2WA/2NJ/2RK
6-162
Contents
Set/release the consecutive eject sheet limit, when setting the eject place to the left eject out-
put(Adapt to only the lower side of let eject outlet).
Purpose
Set/release the consecutive eject sheet limit for the left eject output(Adapt to only the lower side
of let eject outlet) depending on the user's demand.
Setting
1.Press the [Start] key.
* :Select the item to set.
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U342 Paper eject control setting
(Message: Set Finisher Paper Stack Limit)
Items Contents
On Set the consecutive eject sheet limit for the left eject output
Off Release the consecutive eject sheet limit for the left eject output
To Next Page
Loading...
