2WA/2NJ/2RK
6-163
Contents
Switches between duplex or simplex copy for the initial copy mode.
Purpose
Sett the frequently used settings depending on the user’s usage.
Setting
1.Press the [Start] key.
2.Select the item to set.
* :Initial setting: Off
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Sets when to display a message notifying that the time for maintenance is about to reach, by set-
ting the number of prints that can be made before the current maintenance cycle reaches.
Displays the maintenance precaution message when the page count reaches the set value
before the maintenance count.
Purpose
Change the time for maintenance precaution display.
Setting
1.Press the [Start] key.
2.Change the setting value by using [+] [-] key or the numeric keypad.
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U343 Duplex priority mode
(Message: Set Duplex Priority Mode)
Items Contents
On Duplex print priority is enabled
Off Duplex print priority is disabled
U345 Setting the value for maintenance due indication
(Message: Set Maintenance Time Soon Display)
Items Contents Setting
range
Initial set-
ting
Cnt Setting the maintenance time precaution display
(Remaining number of prints that can be made
before the current maintenance cycle reaches)
0 to 9999 0
To Next Page
Loading...
