Kyocera TASKalfa 7002i - Page 775

2WA/2NJ/2RK
6-182
Setting: Black
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: Gray1
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: Gray2
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Setting: Gray3
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the
back page of the adjustment original.
3.Press the [Start] key to set the setting value.
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 10.6
a A value setting -200 to 200 - -0.2
b B value setting -200 to 200 - -0.7
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 76.2
a A value setting -200 to 200 - -0.2
b B value setting -200 to 200 - 1.2
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 25.2
a A value setting -200 to 200 - -0.2
b B value setting -200 to 200 - -0.2
Items Contents Setting range Data
variation
Initial
setting
L L parameter setting 0.0 to 100 - 51.3
a A value setting -200 to 200 - -0.3
b B value setting -200 to 200 - 0.3