2WA/2NJ/2RK
6-216
Contents
Sets the FAX communication.
Purpose
Sets the transmission and reception of ECM
Sets the CED frequency
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Setting: ECM TX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to Off when connecting to the IP telephone line.
1.Select the item to set.
* :Initial setting: On
2.Press the [Start] key. Set the setting value.
* :Completed is displayed.
Setting: ECM RX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to OFF when connecting to the IP (Internet Protocol) telephone line.
1.Select the item to set.
* :Initial setting: On
2.Press the [Start] key to set the setting value.
* :[Completed] is displayed.
U631 Communication control 2
(Message: Communication Control 2)
Items Contents
ECM TX Sets ECM transmission.
ECM RX Sets ECM reception.
CED Freq The frequency of CED is set up.
Items Contents
On ECM transmission is enabled.
Off ECM transmission is disabled.
Items Contents
On ECM reception is enabled.
Off ECM reception is disabled.
To Next Page
Loading...
