L-Mark LK-330E - Basic Operation Guide; Power On and Material Selection

USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
22
Chapter III Basic Operation
Note:
In order to have a correct print out, please configure material options and
specifications correctly and ensure that the tube printer configuration is compatible
with your material and its specifications.
3.1 Power-on
Upon powered on, the machine will produce the following power-on display. At this
time, the cutter dynamo will run and initialize.
3.1 Selection of Printing Material
After power-on display, the machine will produce material selection window and the
screen will display as follows:
Use [
←
] or [
→
] keys to select the desired printing material, and then press [Enter]
key.
3.2 Selection of Printing Material Specifications
3.2.1 Selection of sleeve tube specifications
Select “sleeve tube” on the material selection window and then press [Enter] key. The
following window will be displayed:
L-MARK
PVC Tube
Label
Shrink Tube