L-Mark LK-330E - Cutting Settings and Print Scope

USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
46
need to press the superscript or subscript key repeatedly.
4.2.20 Text head
This function is provided to move the cursor to the first page of the current document.
4.2.21 Text end
This function is provided to move the cursor to the final page of the current document.
4.2.22 Cutting set
This setting is valid for all the contents to be printed.
This key is provided to set half-cut, cutting line(no half-cutting), and nil (no
half-cutting, no cutting line). The initial setting is half-cutting.
Press [Cutting setting] and the screen will display as follows:
Press [↑] or [↓] to make your selection and press [Enter] to complete the setting.
Then, the screen will return to the text editing window automatically.
4.2.22 Cut depth
The initial setting value for half-cut depth is “0”.
¾ If you have selectd the tube after press [half-cut depth] and the screen will
display as follows:
Half-cut;
Cut line;
Nil
Cut depth of tube
Full-cut depth