L-Mark LK-330E - Create a New Page; Display Brightness Adjustment; Key Combination

USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
53
and then press [Enter].
With this function, it is possible to adjust the actually printed length to what you have
specified.
4.2.31 Create a new page
This function is provided to insert a new page between two existing
pages or append it to the end of the text.
 Create a new page at the end of the text.
Move the cursor to the last page of the text and press [Enter], and then you have just
created a new page at the end of the text.
 Insert a new page between two pages
Move the cursor to a page and press [Enter], then you have just created a new page
behind the said page.
Note:
 The new page assumes the same attributes with its preceding page.
 The new page assumes a page number sequentially.
 If the new page contains nothing, it will be ignored during printing.
4.2.32 Display brightness adjustment
Keep [Ctrl] pressed and press [→], [→], [↑], or [↓] key to adjust the screen brightness
or contrast.
4.2.33 Key combination
 [Ctrl] + [Shift]+ [Y]
Used to see the type of the ribbon.
 [Ctrl] + [Shift]+ [V]
Used to see the Version number of the software.
 [Ctrl] + [Shift]+ [L]
Used to see the length of the ribbon.