USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
28
Chapter IV Function Keys
4.1 Notes to Function Keys
1. [ ] indicates a function key and framed contents indicate screen display.
2. A miss operation will result in a piece of error information on the screen. Miss
operations can not be performed.
3. Function keys not yet used retain their original factory setting.
4. In printing mode, none of the function keys will work.
5. While you are editing a function key, the rest function keys can only be used
when this function key has completed its editing task or the editing status has
been Reversed (only [Cancle] key can be used to exit from an editing status).
6. After you complete editing function keys, you will see the text editing window.
7. A new page shares the same attributes with the preceding page.
8. The five settings, namely length, font size, repeat, effects, and direction are all
related to the cursor location. After you have completed the setting, the page in
which the cursor exists and all the pages behind it will have the same settings.
You may use [Text head], [Text end], [↓], [↑], [→] and [←] keys to move the
cursor.
9. The screen can display up to 3 lines, each line being able to display up to 12
English letters or 8 Chinese characters.
10. The contents of each page are displayed in one line (in bi-page settings, the
contents behind the bi-page symbol are in the second line), therefore if the screen
can not display a long page, the previous input contents will be shifted to the left
on the screen.
11. Length, font size, semi-cutting, effects, repeat, color strength, upper & lower case,
material type, Chinese or English, page number, and page contents setting status
are all displayed on the screen.
12. For bi-line, the line distance is constant; for bi-columns, the column distance is
constant.
13. The initial setting of letter keys is UPPER CASE.
To Next Page
Loading...
