L-Mark LK-330E - Print Specifications and Font Customization

USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
23
Use [
←
] or [
→
] keys to select the desired specification, and then press [Enter] key.
3.2.2 Selection of label specifications
Select “label” on the material selection window and press [Enter] key, then the
following window will be displayed:
Use [
←
] or [
→
] keys to select the desired specification, and then press [Enter] key.
3.2.3 Selection of heat shrink tube specifications
Select “Shrink tube” on the material selection window and press [Enter] key, then the
following window will be displayed:
Use [
←
] or [
→
] keys to select the desired specification, and then press [Enter] key.
Tube size
3.0, 4.0, 5.0, 6.0
Label size
6 9 12
Shrink tube size
3.0, 5.2, 6.8