USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
3
Chapter I Foreword
Welcome to use LK-330E label & mark printer! This manual describes the features of
LK-330E and the points of attention during operating and using it. Please study this
manual to have an adequate understanding of LK-330E features before you use this
machine so as to take a better advantage of it. After reading it, keep this manual
properly for future reference.
[Statement]
1. The “
L-MARK
” are the registered trade marks of Label & Mark Industries
Company.
2. The contents of this manual shall not be altered without prior consent. The
Company reserves the right to bring changes to the products concerning
technologies, parts and components, software and hardware. For more
information about the products, please contact
L-MARK
or the sale agents.
3. Without the prior written approval by
L-MARK
, no contents of this manual
shall be copied or transmitted in any form or by any means.
4. The Company is not to be held responsible for any consequences that may arise
from any operations not conforming to the instructions contained in this manual.
5. Other signs and trade marks referenced in this manual are owned by their
respective owners.
6. This manual is subject to change without prior notice.
7. For more information about this equipment and the Company, please visit
www.lmark.net.
[Safety Instructions]
Please study the following before you begin to use this printer:
1. Safety warning
Warning: The print head generates heat. Do not touch it or other
parts around it during printing or shortly after printing.
Warning: Do not touch the print head face or the connector;
otherwise the print head may be damaged as a result of
static.
To Next Page
Loading...
