USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
48
The cutting depth ascends from -3 to +3.
4.2.23 Print Scope
This function is provided to print selected pages in the text.
This setting allows you to print the pages selected by you (blank pages will not be
printed).
When you have finished the ending page number for printing and press [Enter], the
machine will begin to print.
If you do not enter the starting page number, then the default value will be the number
of the page in which the cursor exists; if you do not enter the ending page number,
then the number of the last page will be the default value. That is to say, if you do not
input the starting page number nor the ending page number, then the machine will
print the page in which the cursor exists until the last page of this document.
4.2.24 Print
After you have made all the settings and input the print contents, this function enables
you to print the contents of all the pages in the current document on the printing
material.
Blank pages will not be printed.
During printing, the screen will display Printing.
4.2.25 Capital
Press this button once to alternate between upper case and lower case input (invalid
for Chinese input). The initial setting is English upper case.
Enter the scope of printing：
Start page:
To Next Page
Loading...
