L-Mark LK-330E - Selection of Font Size; Change Character Size

USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
24
3.2.4 Selection of Font Size
After the selection of printing material specifications and press [Enter] key to recall
the font size selection window. The screen will display as follows:
Use [
←
] or [
→
] keys to select the desired font size, and then press [Enter] key.
[Note]
 For 6mm label and 3.0 sleeve tube, you may choose font sizes 1, 2, 3,4;
 For 9mm label and 4.0 and 5.0 sleeve tube, you may choose font sizes 1, 2, 3, 4
and 5;
 For 12mm label and 6.0 sleeve tube, you may choose font sizes 1, 2, 3, 4, 5, and
6.
3.2.5 Change Character Size
After the selection of font size and press [Enter], The screen will display as
follows:
Use [
←
] or [
→
] keys to select the width font size, and then press [Enter] key to recall
the edit window.
Font size:
１２３４５６
Character Size :
100% 50%