USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
37
Press [↑] or [↓] to select your desired choice and press [Enter], then the screen will
display as follows:
Enter the starting sequential letter and press [Enter], then the screen will display as
follows:
Enter the terminating letter and press [Enter], the setting is completed and then the
screen will return to the text editing window automatically.
Now, the text editing window will display the following sequential letter status:
For UPPER CASE sequential letter (A—Z): A
For lower case sequential letter (a—z): a
Note:
¾ If a page has been assigned both an S/N and a Repeat function, then the S/N
function will be executed before Repeat.
¾ The numbering function can not used in the vertical print mode.
4.2.9 Repeat
This function is provided to set the repeated printing times of certain pages. The
repeated times can be any one from 1 to 20. The initial setting has a repeat number of
1, which means the selected contents will be printed only once.
Once this command is used, the page in which the cursor exists and all
Alpha:( A~Z );
Start:
Alpha:( A~Z );
End:
To Next Page
Loading...
