USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
30
4.2.2 Length
Specified page length and automatic page length are valid for the page in
which the cursor exists and for all the pages behind it. Overall length
adjustment is valid for all the pages in the document.
This function is provided to specify the page length to be printed. The length ranges
from 6mm to 100mm, and shall be integer numbers only.
Press [Length] key, and the screen will display as follows:
Specified page length
Select Specify Length , press [Enter] key, and the screen will display as follows:
Input the page length value you desired at the cursor and then press [Enter]. The page
in which the cursor exists and all the pages behind it will assume this specified length.
Then the screen will show the text editing window automatically.
For example: Enter “18”, the page length will be 18mm.
Note:
If the selected page length is too short to print out all the characters, a message
will be prompted: Page contents too long!
Press any key to return!
For specified page length, if the input characters are too many, a message will be
prompted: Page contents too long! Press any key to return!
Auto Length
Specify Length
Enter length
(6~100):
To Next Page
Loading...
