USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
39
envisaged due to material or other external factors.
The initial setting is Center and there is no fine adjustment.
¾ If you have selectd the tube after you press [Enter], then the screen will display as
follows:
Press [Enter], then the screen will display as follows:
The fine adjustment ranges from -3.0 to +3.0mm.
¾ If you have selectd the label after you press [Enter], then the screen will display
as follows:
Press [Enter], then the screen will display as follows:
Tube adjust
Current: +0.0
Adjust value
(-3.0 ~+ 3.0):
Label adjust
Current: +0.0
To Next Page
Loading...
