Labconco Axiom C1 User Manual

21
4: Installation
With the installation site properly prepared, you are ready to unpack and install the
equipment. This section covers how to:
 Unpack and move the product
 Install the product
 Connect electrical service
 Connect service utilities
 Connect to an exhaust system (optional)
 Arrange certification for the product
Unpacking
The following tools are required to unpack the equipment:
 Box knife
 #2 Phillips screwdriver
 Two ½” wrenches
 Pliers
 Carpenter’s level
The following safety precautions must be followed by all personnel unpacking the
equipment.
 Wear safety glasses
 Wear gloves
 No loose fitting clothes
 Wear close-toed shoes
 Follow safe-lifting practices (do NOT attempt to lift this product without
specialized lifting equipment certified to lift up to 1000 lbs.)
A quick reference Installation Guide is located on the front sash glass (see Figure 4-2)

Labconco Axiom C1 Specifications

General

Brand	Labconco
Model	Axiom C1
Category	Laboratory Equipment
Language	English