70
9: Accessories
This section details the available field-installable accessories and approved
modifications for your Axiom Type C1 biosafety cabinet.
Telescoping Base Stands
These stands are included with some product models, or available separately. The base
stand catalog numbers are listed in Table 9-1 below. An optional caster wheel kit is
available (catalog number 3730500).
Manual or Electric Hydraulic Lift Base Stands
These base stands offer infinitely adjustable height between 25.5 and 33.5 inches (648
– 851 mm), providing a cabinet work surface height of 28.0 to 36.0 inches (711 – 914
mm). The height is adjusted either by a manual (hand crank) or electric pump that
drives the hydraulic legs of the stand. The hydraulic stands are equipped with fixed
levelling feet. The base stand catalog numbers are listed in Table 9-2 below. An
optional caster wheel kit is available (catalog number 3784000).
Note – Make certain service and exhaust connections to the product are properly
prepared to allow for the raising or lowering of the product with these stands.
To Next Page
Loading...
Need help?
General
