71
SoLo
TM
Electric Hydraulic Lift Base Stands
These base stands permit the cabinet to be lowered enough to transport it through a
standard doorway as low as 84 inches (2133 mm). They offer infinitely adjustable height
up to 33.5 inches (851 mm), providing a cabinet work surface height up to 36.0 inches
(914 mm). The hydraulic stands are equipped with locking casters. The base stand
catalog numbers are listed in Table 9-3 below.
IV Bar
The IV Bar can be field installed on any size Axiom biosafety cabinet. The bar allows
for easy hanging of IV bags used inside the biosafety cabinet. Catalog numbers are
listed in Table 9-4 below.
Flat Work Surface
Some users may wish to exchange the dished Chem-Zone work surface of an Axiom
with a flat replacement work surface. Catalog numbers are listed in Table 9-5 below.
Note: Axiom BSCs used with flat work surfaces are not listed to NSF/ANSI Standard 49.
Note – Make certain service and exhaust connections to the product are properly
prepared to allow for the raising or lowering of the product with these stands.
To Next Page
Loading...
Need help?
General
