Labconco Purifier Logic+ 30132 User Manual

Name: Labconco Purifier Logic+ 30132
Brand: Labconco
Rating: 5 (1 reviews)

174 pages

To Next Page

To Previous Page

Product Service 1-800-522-7658

Quickstart

How do I change the Configuration of the Logic+?

1. Press the

button.

2. Press the ▼ button until the

Services

option is highlighted (it will

turn yellow).

3. Press

OK/Mute

to enter the Services menu screen.

4. Press the ▼ button until the

Configuration

option is highlighted

(it will turn white).

5. Press

OK/Mute

to alter the configuration.

6. You will see a

warning screen

alerting you that you are about to

alter the BSC’s settings.

7. Press

OK/Mute

to input the password.

8. When requested for the password press

Light

UV light

Timer

then

OK/Mute

MAIN MENU

1. MyLogic

2. Settings

3. Service

or to choose,

OK to select, MENU to escape

or to choose,

OK to select, MENU to return

Current Settings

Restore Default

Diagnostics

Calibration

 Configuration



Service

Configuration

PASSWORD:

ATTENTION!

The following screens are used

to alter the operation of the

Logic. They should only be used

by a qualified certifier as part

of the certification process.

Configuration

OK to proceed, MENU to return

Questions and Answers:

I
Ian GarciaAug 4, 2025
What to do if the Labconco Purifier Logic+ 30132 Laboratory Equipment cabinet blower and lights won’t turn on?
- C
  Carol CollinsAug 4, 2025
  If the cabinet blower and lights aren’t working, first, ensure the unit is plugged into the appropriate electrical outlet. Then, check if the System Reset Switch is turned on. Also, reset the circuit breakers. If problems persist, run keypad diagnostics and check connections and raise the sash.
T
Thomas WilliamsAug 10, 2025
Why is the fluorescent light not working on my Labconco Purifier Logic+ 30132?
- M
  Mark ChoiAug 10, 2025
  If the fluorescent light is not working, first, make sure that the sash is open, because the fluorescent lights will not work with the sash closed. If the sash is open, replace any defective lamps. Inspect the lamp wiring and replace the lamp ballasts if they are defective. Also, run keypad diagnostics and check connections.

Labconco Purifier Logic+ 30132 Specifications

General

Filtration	HEPA
Filter Type	HEPA
UV Light	Optional
Nominal Width	3 ft
Downflow Velocity	0.38 m/s (75 fpm)
Filter Type (Exhaust)	HEPA
Electrical Requirements	115V, 60Hz
Electrical	115V, 60Hz