Labconco Purifier Logic+ 30132 User Manual

Product Service 1-800-522-7658
50
Section Three –
Installation
Now that the installation is properly prepared, you are ready to inspect, install, and
certify the Logic+ biosafety cabinet. This chapter covers how to:
 Unpack and move the biosafety cabinet.
 Install the cabinet.
 Connect the electrical supply source.
 Connect the service lines.
 Connect to an exhaust system (optional for Type As).
Tools required for installation the biosafety cabinet include two 1/2" wrenches, a flat-
blade screwdriver, a #2 Phillips screwdriver, and a carpenter’s level.
Note: The biosafety cabinet models weigh between 400–700 lbs. (182-318 kg). The
shipping pallet allows for lifting with a mechanical lift truck or floor jack. If you must lift
the product manually, use at least six (6) persons and follow safe-lifting guidelines.

Labconco Purifier Logic+ 30132 Specifications

General

Brand	Labconco
Model	Purifier Logic+ 30132
Category	Laboratory Equipment
Language	English