Labconco Purifier Logic+ 30132 User Manual

Product Service 1-800-522-7658
16
Quickstart
How do I run a diagnostic on the keypad, relays and contacts?
1. Press the Menu button.
2. Press the ▼ button until the Services option is highlighted (it will
turn yellow).
3. Press OK/Mute to enter the Services menu screen.
4. Press the ▼ button until the Diagnostic Diagnostic option is
highlighted (it will turn white).
5. Press OK/Mute to enter the Diagnostic submenu.
6. Press the ▼ button until the Diagnostic Keypad-Relays option is
highlighted (it will turn white). Press OK/Mute .
7. Press any button on the keypad (except Menu ), and note the
display.
MAIN MENU
1. MyLogic
TM
2. Settings
3. Service
or to choose,
OK to select, MENU to escape
or to choose,
OK to select, MENU to return
Current Settings
Restore Default
Calibration
Configuration
 Diagnostics

Service
or to choose,
OK to select, MENU to escape
Keypad -Relays
Sash sensors
Canopy Alarm
Airflow Sensor


Diagnostics

Labconco Purifier Logic+ 30132 Specifications

General

Brand	Labconco
Model	Purifier Logic+ 30132
Category	Laboratory Equipment
Language	English