EasyManuals Logo

Labconco Purifier Logic+ 30132 User Manual

Labconco Purifier Logic+ 30132
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background image
Product Service 1-800-522-7658
63
Navigating the Logic+ Menu Screens
MyLogic
TM
allows you to use the Smart-Start or Night-Smart features that activate
functions automatically when the sash is opened or closed.
If equipped, the UV lamp can be programmed to operate for a given time interval when
the sash is closed, before it shuts off.
NOTE: When you are in the menu mode, if a selection is not made within 30
seconds, the display will reset back to display mode.
Keypad operations are shown as
blue bold italic
. Menu screen selections are shown as
green italics
.
NOTE: Pressing the appropriate touchpad button will override Smart-Start or
Night-Smart selections.
To access the menu, press the
Menu
button. The display panel will show the first level
menu. To select from the various menu options press the or buttons until the
selected option is displayed. Press
OK/MUTE
to accept that option, or press
Menu
to
return to the previous menu level.
Menu
Display Mode Menu Mode

Table of Contents

Questions and Answers:

Labconco Purifier Logic+ 30132 Specifications

General IconGeneral
FiltrationHEPA
Filter TypeHEPA
UV LightOptional
Nominal Width3 ft
Downflow Velocity0.38 m/s (75 fpm)
Filter Type (Exhaust)HEPA
Electrical Requirements115V, 60Hz
Electrical115V, 60Hz

Related product manuals