Product Service 1-800-522-7658
20. The first screen allows you to set the Type of cabinet. Leave this
setting alone, and press OK/Mute.
21. The second screen allows you to configure the cabinet for a
canopy or not.* Leave this setting alone, and press OK/Mute.
22. This screen configures the unit for a UV light or not. Select “to
have a UV Light”, and then press OK/Mute, the unit will shut off
and then reset in the new configuration.
Refer to the user’s manual for further information regarding the proper operation
and maintenance of the UV light.
Configuration
Type A Canopy Option
This cabinet has:
or to choose,
OK to select, MENU to escape
a canopy
no canopy
This Logic is configured:
or to choose,
OK to select, MENU to return
to have a UV light
to NOT have a UV light
UV Settings
To Next Page
Loading...
Need help?
General
