66 Controls and Indicators
Auto-Neutral Switch
The auto-neutral system is available on units equipped with an Allison electronic transmission. The
auto-neutral allows the operator to shift from “drive” to “neutral” automatically without touching the
shifter lever. For more information on this, refer to the chassis manufacturer’s manual.
Figure 3-26
Auto-neutral switch
10-Second Inhibit Switch
This switch, also known as gripper auto-close override, allows the operator to open the gripper in the
hopper in order to drop the grabbed object directly into it. It also allows the operator to pick up
elevated carts.
Figure 3-27
10-second inhibit switch
To Next Page
Loading...
Need help?
General
