76 Controls and Indicators
Figure 3-42
Stop Push-Button
Pack Push-Button (green)
The packer start cycle button activates the packer for one complete cycle. A complete cycle takes
about 12 seconds.
Figure 3-43
Pack Push-Button
Retract Push-Button (yellow)
The packer retract button will retract the packer to the beginning of its stroke. This control is useful
when the body is full and the material prevents the packer from reaching the end of its stroke. Manual
retraction of the packer is necessary to bring back the packer.
To Next Page
Loading...
Need help?
General
