4
Operating the
M
INIMAX
TM
The different methods, procedures and necessary
actions to operate the M
INIMAX
TM
are presented in this
section.
Before operating the M
INIMAX
TM
, the operator must
be completely familiar with all safety procedures, and
the location, operation and functions of all controls
and indicators related to the operation of the unit.
NOTE: Some controls and indicators are options and may
not be installed on your MINIMAX
TM
.
You must complete the daily inspection before starting
the vehicle. It is your responsibility to report any
malfunctions or concerns to your supervisor and
maintenance personnel.
Consult with your supervisor for specific rules of
driving the M
INIMAX
TM
.
Obey all speed restrictions and regulations.
Daily Inspection
Approaching the Vehicle
As you approach the vehicle, look for any object under
or against the vehicle and check the surroundings for
people and other vehicles, as well as for overhead and
ground-level obstructions. Ensure that the truck is
parked at the most convenient place where you will
have all the clearance required to perform a complete
start-of-the-day inspection. During the daily
inspection, look for any structural damage. Inspect
tires and check for leaks.
Warning!
Always read and understand the
Operator’s Manual before operating the
equipment.
To Next Page
Loading...
Need help?
General
