Labrie MINIMAX - Extended arm

88 Operating the MINIMAX
TM
Apply the following inspection procedure:
1. Make sure to park the vehicle on safe, level ground.
2. Ensure that the parking brake is applied and the vehicle is tagged out for maintenance purposes
(see Locking Out and Tagging Out the Vehicle on page 35).
3. Start the engine and engage the hydraulic pump (see Figure 3-20).
4. Fully extend the arm.
Figure 4-2 Extended arm
5. Turn OFF the hydraulic pump and the engine.
6. Perform a visual inspection of the following items:
• Mounting bolts;