158 cHAPTER 8: Service
Model 336 Temperature Controller
8.10 Rear Panel
Connector
Definition
The sensor input, heater output, terminal block, USB, Ethernet, and IEEE-488 con-
nectors are defined in FIGURE 8-3 through FIGURE 8-8. For thermocouple connector
details refer to FIGURE 3-8.
FIGURE 8-3 Sensor input A through D
Pin Symbol Description
1 I– –Current
2 V– –Voltage
3 None Shield
4 V+ +Voltage
5 I+ +Current
6 None Shield
TABLE 8-3 Sensor input A through D
connector details
FIGURE 8-4 Heater output connectors
To Next Page
