6-40 System 824 Training Manual 2/19/98
Here we see the Lmax and Lmin for
the first interval.
Step 2 In this case, it is the 1
st
interval. Press r to
advance to the “Interval-b” screen.
This display shows the Lpeak1 and
Lpeak2 for the first interval.
Step 3 Press r to advance to the “Interval-c”
screen.
This screen summarizes the number
of times that the SPL and Peak
thresholds were exceeded during the
interval, along with the number of
overloads that occurred.
Step 4 Press r to advance to the “Interval-d”
screen.
Here we see the six Ln statistical
descriptors for the first interval.
Step 5 Press r to advance to the “Interval-e”
screen.
To Next Page
Loading...
