2/19/98 Tools T 5-25
Press TOOLS T to return to the Tools menu.
Power Monitor
Step 1 While in the TOOLS menu, press d to high-
light “Power Monitor”.
The “Battery” screen provides infor-
mation regarding the power source
of the 824. Battery life is expressed
in a percentage (100% being fully
charged). If you are powering the
824 with an external source (such as
AC), the voltage value will be shown
on this screen.
Step 2 Press c to enter the “Battery” screen.
Within the “Power” menu you can
control the Power Settings, and
Charge Mode for the rechargeable
NiMH batteries. You can also access
the “Battery” screen by selecting
“Status”.
Step 3 Press c to enter the “Power” menu.
To Next Page
Loading...
