5-26 System 824 Training Manual 2/19/98
Step 4 With “Status” highlighted, press r to verify
that this is an alternative route to the “Bat-
tery” screen.
Step 5 Press c to return to the “Power” menu.
Step 6 Let’s take a look at the various “Settings”
options. Now press d to highlight “Set-
tings”.
Within this menu, you can control
the Power Settings parameters.
These include “Power Off Mode”,
“Auto-Off Time”, “Standby Time”,
“Backlight Time”, “Backlight”,
“LCD contrast”, and “External
Power”.
Step 7 Press c (or r) to enter the “Settings” menu.
To Next Page
Loading...
