2/19/98 Tools T 5-27
Step 8 To look at the “Power Off Mode” press u or
d to highlight this choice.
The “Blank LCD” selection will
cause the LCD screen to turn off,
while still allowing the 824 to con-
tinue gathering data. The idle time
required before this happens is set in
the “Auto-Off Time” feature that we
will look at shortly. “Auto Off”
enables a mode that causes the 824 to
automatically power off if it is idle
for a predetermined time (this time is
also set in the “Auto-Off Time” fea-
ture). This is a power saving feature
of the 824. “Manual Off” overrides
“Auto Off” so that the 824 will only
power off if the user presses the On/
Off v key.
Step 9 Now press c (or r) to enter the “Power Off
Mode” menu.
Select a choice, or press l to return to the Power Set-
tings menu.
Step 10 Let’s press d to highlight “Auto-Off Time”.
To Next Page
Loading...
