2/19/98 Log - Logging Sound Level Meter (Option 01) 6-51
This display shows the Peak 1, Peak
2, and Lmax values for the exceed-
ance event.
Step 2 Press r to advance to the “Excd-b” screen.
Step 3 Press l or r to return to the “Excd-a”
screen.
Again, the Leq and SEL of the event,
and the time and date of the start are
logged. Notice the “2/” label at the
top of the screen. This indicates that
you are looking at the 2
nd
exceedance
event.
Step 4 Go ahead and create another noise event to
initiate one more exceedance event. Once that
is done, press d to view the data from this
event.
Step 5 Press c to enter the “View Excd” menu.
To Next Page
Loading...
