2/19/98 View V 3-3
These are the current Lmax values
from the Fast and Slow detectors
with the weighting values applied.
Step 5 Press r again to get to the “Any Level c”.
These are the current Lmin values
from the Fast and Slow detectors
with the weighting values applied.
Step 6 Press r again to get to the “Any Level d”
screen.
You are now viewing the current
Peak data from the Peak detector
with the A, C, and Flat weighting
values applied. The display also
repeats the SPL data from the Fast
detector.
Step 7 Press r again to get to the “Any Level e”
screen.
Step 8 Press r again to return to the “Any Level
a”.
To Next Page
Loading...
